Dry sliding adhesive wear behaviour of as-cast and austempered ductile iron (ADI) samples alloyed with manganese and copper was investigated in a pin-on-disc wear testing machine. As-cast samples suffered a rapid and continuous wear, while the austempered samples exhibited improved wear resistance on increasing the austempering temperature and time. ADI samples with higher copper plus manganese contents inherently possessed higher hardness due to presence of martensite in the ausferrite matrix. The wear conditions used in the present
study further promoted the formation of martensite under wear load and contributed much improved wear performance. In ADIs containing manganese only, wear process involved a mixed mechanism of oxidation and delamination. On combined alloying with copper and manganese, wear resistance increased considerably showing only mild oxidation and practically no delamination. The combinedly alloyed austempered samples exhibited even better wear resistance than that of cast and heat treated high manganese steel. Thus, the addition of manganese and copper in the experimental ductile irons assisted austempering by virtue of their synergistic effect on hardenability of Fe-C alloys and improving wear resistance through subsequent work hardening of the wear surface.

Please login / register to post comments

news in steel

Tibnor’s acquisition of Sanistål’s steel distribution business completed

SSAB’s subsidiary Tibnor has now comleted the acquisition of the steel distribution business of the Danish company Sanistål A/S, Denmark’s second largest steel distributor.

NUCOR TAPS DANIELI MI.DA. TECHNOLOGY FOR ITS STRATEGIC EXPANSION IN REGIONAL REBAR MARKETS

When exploring the opportunity to expand its presence in new regional markets in the Midwest and Southeast of the USA, Nucor immediately understood the benefits of the MI.DA. technology and ultimately chose Danieli to supply the complete technological equipment package for two MI.DA. plants, in Sedalia (Missouri) and Frostproof (Florida).

Chem-Trend to Showcase New Die Lubricant Technologies at GIFA

Chem-Trend, a global leader in the development, manufacturing, and marketing of high-performance release agents, purging compounds, and other ancillary molding products, will showcase another new line of die lubricant polymer technologies, specifically developed to help die casters improve operational efficiency, at the GIFA in Düsseldorf from June 25-29, 2019.

Impressive performance by the “Bright World of Metals”

Driving force behind the industry

Excellent registration figures for the “Bright World of Metals”: about 2,100 exhibitors