Resistance against gouging and abrasive wear in impact crushing arms cast from Mn-steel, is related to variations of carbon, manganese and the microstructure of the cast steel. Additions of Boron, molybdenum and chromium to the plain Mn-steel casts (0.8-1.4%C-13%Mn) increase its wear resistance and fatigue life time during crushing operation due to enhancement of its strain hardeing capacity, grain refinement and strengthening by solid solution hardening of the matrix. This improvement is due to the intended change in the microstructure where precipitation of boron carbides and chromium carbides inside the austenitic matrix, grain refinement and increasing soluble carbon content in austenite phase is occurred. Solution treated Mn-steels (1050C, 2h, WQ) alloyed with boron showed crushing capacity of about 1200-1550 tones basalt per set depending on their compositions. The hardness of the as water quenched austenite is increased by about 25% to reach 397 HB when alloyed with 0.37%B. However work hardened matrix of Cr+Mo+B modified Mn-steel impact arms showed a bulk hardness of about 498 HB. The fatigue resistance of boron alloyed steel is increased to about 1.4 times over that measured for plain Mn-steel.

Login to Download full PDF Article...

Please login / register to post comments

news in steel

Rolling mill orders from AEMZ and NPZ

Two new High-productivity, High-quality and High-efficiency H3 rolling mills will be installed and put into operation in Russia during 2020.

SMS group to modernize gas cleaning systems at POSCO Gwangyang

SMS group, in cooperation with AERIX Co., Ltd., South Korea, has been commissioned to modernize the gas cleaning systems of the three BOF (Blast Oxygen Furnace) converters at the integrated steel mill of POSCO in Gwangyang, South Korea.

New opportunities for customers in Central and Eastern Europe

SSAB is providing new processing opportunities for customers to explore, with a laser cutting machine and state-of-the-art press brake featuring a patent pending bending technology. The new machines were presented during a unique event at the SSAB steel service center in Oborniki, Poland.

Aceros Arequipa orders steel mill and continuous billet caster

Corporación Aceros Arequipa S.A. (CAASA), based in Arequipa, Peru, has awarded SMS group an order covering the supply of mechatronic equipment for a new steel mill and a billet caster with six strands for its Pisco site.