Corrosion behavior of 19Cr-18Mn-0.69N austenitic stainless steel was studied by cyclic polarization technique in 3.5 % NaCl solution and was compared with that of other austenitic stainless steels having different compositions namely, AISI 316L and one with 14 Cr and  8% Mn, denoted 14Cr-8Mn in the following. The results showed that 19Cr-18Mn-0.69N austenitic stainless steel exhibits higher pitting resistance compared to that of other two alloys. SEM micrographs of 19Cr-18Mn-0.69N austenitic stainless steel after corrosion showed no pits at the alloy surface even when it was polarized beyond transpassive pitting potential. However severe attack was seen at the araldite-metal interface. But, in case of AISI 316L and 14Cr-8-Mn severe pitting attack was seen at the surface, whereas no attack was seen at araldite-metal interface. Critical crevice temperature for the three stainless steels was determined. 19Cr-18Mn-0.69N austenitic stainless steel was found to have good crevice corrosion resistance compared to other alloys investigated.

Please login / register to post comments

news in steel

Tibnor’s acquisition of Sanistål’s steel distribution business completed

SSAB’s subsidiary Tibnor has now comleted the acquisition of the steel distribution business of the Danish company Sanistål A/S, Denmark’s second largest steel distributor.

NUCOR TAPS DANIELI MI.DA. TECHNOLOGY FOR ITS STRATEGIC EXPANSION IN REGIONAL REBAR MARKETS

When exploring the opportunity to expand its presence in new regional markets in the Midwest and Southeast of the USA, Nucor immediately understood the benefits of the MI.DA. technology and ultimately chose Danieli to supply the complete technological equipment package for two MI.DA. plants, in Sedalia (Missouri) and Frostproof (Florida).

Chem-Trend to Showcase New Die Lubricant Technologies at GIFA

Chem-Trend, a global leader in the development, manufacturing, and marketing of high-performance release agents, purging compounds, and other ancillary molding products, will showcase another new line of die lubricant polymer technologies, specifically developed to help die casters improve operational efficiency, at the GIFA in Düsseldorf from June 25-29, 2019.

Impressive performance by the “Bright World of Metals”

Driving force behind the industry

Excellent registration figures for the “Bright World of Metals”: about 2,100 exhibitors